The perfect companion for high density work holding.
Made from 4140PH (28-32HRC)
Machine in place to create durable and accurate "soft" jaws
Moveable rails offer .100" of travel for a secure grip when stock material widths vary
Secure with the included 1/4-20 flat head screws
Recommended torque: 6-9ft-lbs into aluminum fixture. 9-12ft-lbs into helical inserts.
Consider balancing the clamping forces by using a moveable rail on each side of the fixed rail
 
Setup Instructions:
To machine the moveable blank rails, pin in place using the included 3/32" dowel pins and secure with the 1/4-20 flat head fasteners. Drill 2.39mm clearance holes in your fixture to accept the included 3/32" dowel pins.
 
Recommended tooling:
Nachi 2.39mm Drill (EDP# 0694978)
 
Speeds & Feeds:
Drilling aluminum - 125SFM (5093RPM), 0.0014" IPR, 7.1 IPM
 
Pair with the Mojo Grip - Fixed Rail Blank - 1/4-20